Posted by John P. (15.228.0.5) on June 16, 2003 at 09:56:04:
In Reply to: Re: wood seams re-appear on les paul goldtop posted by Robin on June 14, 2003 at 23:49:30:
Hi Robin - thanks for the advise. I will try this. BTW: Do you have any idea what might be causing the wood seam surface to rise slightly and appear as a line?
Best regards, John P.
: : Hi All, this is my 1st restore and I'm having a problem with the 3 piece maple top on my les paul. Top was sanded to bare wood, and grain filler, S&S, and even Bins applied before gold top spray. No matter, the 2 wood seams re-appear as a raised line. I sanded down twice and are-applied bins but after a week of spraying the gold top, the seams show up. Would like to know if anyone else had this problem??? Thanks - JP
: BILL SAYS... "Use your Gold Top spray as a filler. Spray a line down each seam and let it dry. Repeat this process. Sand lightly with a block and 800 dry. Shoot three light coats of Gold Top Spray over the WHOLE top and let dry overnight. Then shoot a light coat of clear to lock it in. "