|
|
|
|
tons...tons of carbon 
no timing cover
broken linkage
more broken linkage
guess what... more broken linkage
missing grommet
engine started up right away when I figured out what this little gem was and how to operate it. I did replace every inch of fuel line and pull off carbs and clean
a disaster in the making
my wife's burned pans aren't this bad
damaged cowl. I did take a propane torch on the inside and bend this back and plastic welded.
Rubber hoses were hard...real hard
adding thermostats...there were none.
this is really an after pic... carbs cleaned and reinstalled
not homemade block off plate for oil injection.
someone painted this think with a brush. CLE lower unit appears to be in good shape. No leaks, dings or missing chunks
I've seen birthday cakes with thinner icing than this
It's amazing how long it took me to clean this.
Tuner is sitting at bottom of mid-secion
that C ring is a bitch to remove to get to this point.
Now the real story...
Evil little part on the right
F-ing A!!!! Solid mounts
tools to get the job done
Tuner is about a foot away from it's home
Nasty
cracked like a California fault line
looks like a missing tooth
this is what happens to your shaft with no tuner installed.
Nice sound from these
a preview of the future... bitchin looking boat
Don't ask
don't ask here either
new gaskets added
where's the seal?
looks like cancer
maybe AIDS instead of cancer
Herpes?
the only way to remove and engine. bought a lifting ring for $30 on ebay
cable sitting in back of my truck...this failed in the driveway, but not at the lake!
I fixed this crack with plastic welder
|
