Steelmax Metal Cutting Saws and Magnetic Drill Cutters

SteelMax® is committed to growth by providing affordable high performance metal cutting tools for professionals and standing behind these tools with excellent customer service. We strive to offer metal cutting solutions that save our customers time and money, delivering quality results quickly and safely.

S9FR - 9” Metal Cutting Saw

• Cuts mild steel up to ½” thick and has a depth of cut of 3.25” for cutting pipe, channel, angles, car posts, sheet metal, etc.
  
• The most powerful saw of this size in the market, competitively priced, with a 15 amp motor and 9” carbide tipped blade.
  
• Cuts through steel like wood, delivering a precise, burr-free cut that is cool to the touch, in seconds.
  
• Sold standard with mild steel blade attached, carrying case, hearing and eye protection, and extra brushes.
  
• Heavy duty for industrial uses and widespread applications including: Fabrication, Construction, Fire & Rescue, Farming, more.
  
• Laser site guide for long straight cuts.
  
• Bevels to 45 degrees.

• $420.00 + $25.00 shipping

S14 Dry Cutting Saw

NO COOLANT NEEDED!

• Utilizing a 14” carbide tipped blade, the Steelmax S14 cuts
  through metal faster, safer and cleaner than abrasive chop saws in a fraction of the time and cost.
• Powered with a 15 amp motor and geared to turn slower than a chop saw, the S14 dry cutter cuts like a cold saw, but at a fraction of the cost.
• Sold standard with a 14” carbide tipped mild steel blade attached, heavy duty, industrial strength cast iron base and two position locking vise, this saw is ready for immediate action!
• Cuts solid mild steel up to 1”thickness; cut profiles: pipe, angles, channel with a depth of cut up to 4-3/4”. Bevels to 45 degrees.
• Saves time and money giving cool cuts that need little to no
  finishing, eliminating any need for grinding or cool down time.

• $548.00 + shipping
• Includes a 14" Carbide tipped metal cutting blade

SMD1 Magnetic Base Drill

• The SMD1 is the most powerful, precise, portable magnetic drill in the industry.
  
• Uniquely engineered with a no maintenance rail system designed to extend the life of cutters and reduce cutter run out.
  
• Weighing only 23 lbs., the D1 cuts holes up to 1-1/2” in diameter through 2” thick mild steel. Only
  14-3/4” tall, the D1 works in tight spaces and holds tight with its powerful “Intelligent” magnet.
  
• Fewer parts than most drills, the D1 is readily serviced in the field, allowing this drill to work longer and harder.

Magnetic Drill SMD1 $998.00 Plus Shipping

D2 Magnetic Base Drill

• Powerful, Portable Drill that cuts through mild steel from 7/16” up to 2-1/16”. Diameter, with 2” Depth of cut and weighing only 37 lbs.
• Unique low maintenance rail system reduces cutter run out and breakage without adjustments.
• Dual speed for cutting a variety of hole sizes as small as 1/16” up to 2 – 1/16”. Uses adjustable chuck for twist drill bits up to ½”.
• Versatile, Light weight, and powerful, the D2’s unique design allows for easy maintenance and repairs in the field, keeping it in service far longer than competitors with gib system designs.

Magnetic Drill SMD2 $1398.00 plus shipping

Annular Cutters

What is m2AL? The composition of “M2AL” has an increase in the percentage of both carbon and approximately 1% aluminum. The othercompositions are similar to M2. With the increase of carbon and aluminum, the hardness after heat treat can reach HRC68 (Rockwell). M2AL cutters are much more wear-resistant than M2. Because of this extreme hardness, the process of turning, milling and grinding requires special grinding wheels and exacting tolerances.

In manufacturing, the mineral “cobalt” is often very poor in quality and consistency. M2AL was developed to address these inconsistencies and has demonstrated outstanding performance. An additional advantage is the performance and wear characteristics of cobalt without the brittleness at the higher Rockwell numbers.

Aside from the above durability and edge holding features, M2AL cutters have the following:

• The hardness grade varies from the cutting edges to the shank,with 68HRC at the tip and reducing to 55HRC on the shank. This prevents breakage at the highest stress points while improving tip integrity and performance.

• Unique two cut geometry, which cuts smoother with less vibration.

• Unique steps on the lands, which reduces friction and drill load.

Six piece cutter set #SMRC021 1" $148.00

Six piece cutter set #SMRC022 2" $198.00

13 piece cutter set 1" $298.00

13 piece cutter set 2" $398.00

Call us for your best price;

503-581-1516

818-994-1724