Phone Contact Information System
Produced by RWRR Soft Inc.

Query Section
Initial Query Sceen of Phone - Size = 48K This is the initial screen you will receive when you want to query the system about the phone contacts you have received.  That is to ask the system different questions concerning the information that you have placed in the system.  Remember if it was not placed into the system at the beginning, example used the defaults in place of that single piece information you will have the defaults only.  The results of this query is only as good as the original input to the system.  This original input and/or any updates done to this record at this time.

The results of this query of the system will be displayed in the order that you ask for.  In addition you can have the results in ascending or descending order.  The system is set up for thirteen different ways to ask about the different phone contacts that have been placed in the system.  The first thing is to determine what you want to ask about the data within the system.  Then what order do you want the output in.

The thirteen different options are the following:

  1. Internal Personal ID
  2. Person Last Name
  3. Person First Name
  4. Address
  5. City
  6. State
  7. ZIP Code
  8. Date Contacted
  9. Date Information Sent
  10. Course Info Wanted
  11. Contacted Via E-Mail
  12. Date Took the Course
  13. Home phone number.
If you want to return to the main menue just depress the EXIT to return to the main screen.  If you tell it to Do It the results will look like something below.

Return to Top

Output from the Query of the System

Results Of Query For Phone - Size = 69K

The above is the result of the query using the past phone contact information.  In this case it was sorted upon 'Personal ID Number' and the order was 'Ascending'.  The top line or header will show the item used in the sorting of the data and the order you wanted the information placed in.  Remember there were thirteen different options available to you.  The results of the Query will always look the same, meaning what will be found in the first column will be always the 'Pin' regardless of how, different order, the query was done.  The order which it will be displayed will be based on which one of the thirteen options did you say use.

The different arrows on the right side and the bottom are designed to scroll up and down and right to left.

The different columns can by adjusted by you to see the total information in that column.  In this example the column width of the column titled Address is to small to display all the information you could adjust the column width to display it all.  In this example we displayed it using the INTERNAL PERSONAL ID, that value was generated by the system.

When you are done all that is necessary is to depress the EXIT to return to the main screen.

You want to do this query. Return to the main screen. Return to the main screen.