  | | |
| |
| This upscale Midget is getting a new sustainer. |
  |
|
| This Squirrel Works Cloud Warrior is going to heaven when it flies on a vintage AVI D6.1 booster. |
 |
|
| My newest Midget is a 2" upscale that should be a blast. |
 |
|
| This 2.2" Midget is only a single stager now, but will eventually get a booster. |
 |
|
| This 1.2x upscale Midget flies on standard 18 mm motors. |
  |
|
| The rugged, tube-finned Tuber is getting reborn. |
 |
|
| This Midget was saved from the attic after I became a BAR.. |
 |
|
| This classic Big Bertha was found in the attic. |
 |
|
| This classic Alpha was also found in the attic. There's a story behind the fins. |
 |
|
| This Tangent is getting a good bashing. |
 |
|
| This Quark survived its brush with deadly impulse. |
 |
|
| What you can do with a Saran Wrap tube... |
 |
|
| This is yet another Estes K-40 Midget variant. It also uses T motors and and now has 3-stage capability. |
  |
|
| The SuperGee is a minimum diameter 18mm rocket inspired by the old Estes Apogee II. |
  |
|
| These rockets were designed to use the slow-burning Apogee D3-7 motors. |
 |
|
| This Estes Big Bertha has interchangeable motor mounts and can be flown with two or three 18mm motors or one 24mm motor. |
|
|
|
