| 1. | Time Delay |
| 1.1 | Type: Digital CMOS Circuitry |
| 1.2 | Range (Two Models): |
| a. 0.1 to 9990 seconds (Three ranges
0.1 to 99.9, 1 to 999, & 10 to 9990 seconds) |
| b. 0.1 to 9990 minnutes (Three ranges
0.1 to 99.9, 1 to 999, & 10 to 9990 minutes) |
| 1.3 | Adjustments: |
| a. Multiplier: Three ON/OFF switches
select X0.1, X1, or X10 |
| b. Time Setting: Three thumb wheel switches,
direct reading |
| 1.4 | Modes of Operation: A two postion switch selects
Delay on Make, or Interval timing. Single shot action can be accomplishished with
external wiring of Interval mode. (See Operation) |
| 1.5 | LED Indication: LED is illuminated during the time
delay period. |
| 1.6 | Repeat Accuracy: ±0.1% |
| 1.7 | Setting Accuracy: ±2% |
| 1.8 | Recycle Time: 500 milliseconds maximum |
| 1.9 | Time Delay vs Voltage and Temperature: ±5% |
|
2. | Input |
| 2.1 | Operating Voltage: 24, 120 or 230 VAC nominal |
| 2.2 | Tolerance: ±20% of nominal |
| 2.3 | Frequency: 50 or 60 Hertz |
|
|
| 3. | Output |
| 3.1 | Type: Electromechanical relay |
| 3.2 | Form: Double pole double throw |
| 3.3 | Rating: 10 ampreres resistive at 240 VAC |
| 3.4 | Life: |
Mechanical - 10,000,000 operations |
| Full Load - 1,000,000 operations |
|
| 4. | Protection |
| 4.1 | Transient Protected |
| 4.2 | Dielectric Breakdown: 1500 volts RMS
minimum at 60 Hertz between input and output contacts |
|
| 5. | Mechanical |
| 5.1 | Mount: Plug-in (See Accessories for
panel mounting) |
| 5.2 | Termination: Octal Plug (8 pin) |
|
| 6. | Environmental |
| 6.1 | Operating Temperature: -20°C to +60°C |
| 6.2 | Storage Temperature: -30°C to +85°C |
|
| 7. | Panel Mounting Accessory |
 | BZ1 PANEL MOUNT KIT available for SSAC Plug-in Controls.
Also, Octal 8 pin and 11 pin flush mount sockets. See Accessories. |
|
|